skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 204494a ? skyworks proprietary and conf idential information. ? products and product information are subject to change with out notice. ? february 13, 2017 1 product summary sky77 365 p ower a mplifier module for quad - band gsm / gprs / edge applications ? quad - band cellular handsets ? gmsk modulation - class 4 gsm850/900 - class 1 dcs1800/ pcs1900 - class 12 gprs multi - slot operation ? edge modulation - class e2 gsm850/900 - class e2 dcs1800/ pcs1900 features ? high efficiency: ? programmable bias for improved backed - off efficiency ? high linearity ? low standby leakage ? compatible with dc - dc converter ? programmable curre nt clamp ? autonomous over - voltage protection ? self - shielded ? small , low profile package - 3 .0 x 3. 5 mm x 0. 8 mm max. - 12- pad configuration description the sky77 365 power amplifier module (pam) is designed for 2g quad - band cellular handsets support ing fixed gain gaussian minimum - shift keying (gmsk) and fixed gain linear enhanced data for gsm evolution (edge) modulation in the gsm850/900, dcs1800 and pcs1900 bands. class12 general packet radio service (gprs) multi - slot operation is also supported. the c ompact 3.0 mm x 3.5 mm x 0.8 mm module consists of gsm850/900 and dcs1800/pcs1900 power amplifier blocks, 50 - ohm input and out put matching circuitry, and a multi - function power amplifier control (mfc) block. the custom silicon cmos mfc provides pa bias an d product identification read - back capability and is fully programmable through the rf front - end mobile industry processor interface (rffe mipi). the heterojunction bipolar transistor (hbt) power amplifier blocks are fabricated onto a single lngap die; one support s the gsm850/900 bands and the other support s the dcs1800/pcs1900 bands. both pa blocks share two common power supply pads. the ingap die, silicon die, and the passive components are mounted on a multi - layer laminate substrate. the entire assembly is encapsulated with plastic overmold .
ordering information product name order number evaluation board part number sky77 365 power amplifier module sky77 365 copyright ? 2017 , skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (skyworks) products or services. these materials, including the information contained herein, are provided by skyworks as a service to its customer s and may be used for informational purposes only by the customer. skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentation, products, services, specifications or product descriptions at any time, with out notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other di fficulties arising from any future changes. n o license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this documen t. skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, r eproduction or use of skyworks products, information or materials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are provided as is without warranty of any kind, whether express, implied, stat utory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, quality or non - infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accurac y or completeness of the information, text, graphics or other items contained within these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequent ial damages, includi ng without limitation, lost revenues or lost profits that may result from the use of the materials or information, whether or not the recipient of m aterials has been advised of the possibility of such damage. skyworks products are not intended for use in m edical, lifesaving or life - sustaining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products for use in su ch applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. customers should include design and operating safeguards to minimize these and other risks. skyworks assumes no liabili ty for applications assistance, customer product design, or damage to any equipment resulting from the use of skyworks products outside of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trademar ks of skyworks solutions, inc., in the united states and other countries. third - party brands and names are for identification purposes only, and are the property of their respective owners. additional information, including relevant ter ms and conditions, p osted at www.skyworksinc.com, are incorporated by reference.
|
